|
Framed Opening: 43.5" x 12"
Approx. 2,200 cfm
|
- Features a counterweight that is adjustable for balancing multiple inlets
- It can also be adjusted for lower and higher static pressure
- Translucent louver allows light into the room
- TopJet design directs airflow up towards the ceiling area
- 3/4" thick housing walls provide insulation
- Weight bar can be adjusted to balance airflow with multiple units
|
___________________________
Framed Opening: 29.5" x 23"
Approx. 3,000 cfm |
- Features a counterweight that is adjustable for balancing multiple inlets
- It can also be adjusted for lower and higher static pressure
- Translucent louver allows light into the room
- TopJet design directs airflow up towards the ceiling area
- 3/4" thick housing walls provide insulation
- Weight bar can be adjusted to balance airflow with multiple units
|
___________________________
Framed Opening: 43.5" x 23"
Approx. 4,400 cfm
|
- Features a counterweight that is adjustable for balancing multiple inlets
- It can also be adjusted for lower and higher static pressure
- Translucent louver allows light into the room
- TpJet design directs airflow up towards the ceiling area
- 3/4" thick housing walls provide insulation
- Weight bar can be adjusted to balance airflow with multiple units
|
___________________________
Framed Opening: 43.5" x 34.5"
Approx. 6,600 cfm |
- Features a counterweight that is adjustable for balancing multiple inlets
- It can also be adjusted for lower and higher static pressure
- Translucent louver alows light into the room
- TopJet design directs airflow up towards the ceiling area
- 3/4" thick housing walls provide insulation
- Weight bar can be adjusted to balance airflow with multiple units
|
___________________________
Framed Opening: 29.5" x 23"
Approx. 3,000 cfm
Ship Weight: 11 lbs |
- Wall mount inlet designed to mount between the supply hallway and the animal room while allowing for separate minimum ventilation
- Operates automatically off f the negative pressure supplied by exhuast fans (no manual control, cables, or pulleys required)
- Activates at SP .04 to .06
- Full length fiberglass or stainless steel rods act as pivot points and stiffen inlet blades
- A lightweight linkage system is available and ties all the units together to ensure balanced air delivery
- Custom designed BILs available
|
___________________________
Framed Opening: 43.5" x 23"
Approx. 4,000 cfm
Ship Weight: 13 lbs |
- Wall mount inlet designed to mount between the supply hallway and the animal room while allowing for separate minimum ventilation
- Operates automatically off f the negative pressure supplied by exhuast fans (no manual control, cables, or pulleys required)
- Activates at SP .04 to .06
- Full length fiberglass or stainless steel rods act as pivot points and stiffen inlet blades
- A lightweight linkage system is available and ties all the units together to ensure balanced air delivery
- Custom designed BILs available
|
___________________________
8' Ceiling Ductwork
8" wide x 8" high
12" wide x 8" high
Ship Wt.: 22 lbs. |
- Designed for new or existing facilities
- The ceiling mount ductwork allows for two-directional air delivery from a center slot in the ceiling
- The air supply is from the attic or pre-heated hallway
- Eight foot sections accommodate up to six W400 inlets- three per side to deliver high volumes of air
- Easily adapts as a replacement for continuous baffle
- Black in color
|
___________________________
8' Corner Ductwork
6" wide x 8" high
Ship Wt.: 13 lbs. |
- Designed for new or existing facilities
- The corner mount ductwork is excellent when used to pull air out of the attic
- The eight foot sections accommodate up to three W400 inlets
- Easily adapts as a replacement for continuous baffle
- End caps available
- Black in color
|
___________________________
To learn where to purchase a particular product you may reach us toll free at 1-800-553-4102 or email us.
|
