Part #90670
Framed Opening: 22.5” x 22.5”
Approx. 1,915 cfm @ .15 SP
Ship Wt: 11 lbs.
PATENT PENDING

The AC3010 4-Way Directional Actuated Ceiling Air Inlet is proving to be an exceptional swine inlet that gently mixes the air without creating a draft, resulting in even temperatures throughout the entire room for your pigs.

Part #90635
Framed Opening: 22.5” x 22.5”
Approx. 2,089 cfm @ .125 SP
Ship Wt: 22 lbs. (2 inlets per box)
PATENT PENDING

The patented design of the C2200 Ceiling Air Hog Inlet is engineered to allow more cfm through than a C2000. The C2200 is an all-season, four directional hog inlet that improves rooom temperature uniformity and air distribution. The extra cfm per C2200 hog inlet allows the customer to use fewer inlets per room.

Part #90825 (Counterweighted)
Part #90827 (Winched)
Framed Opening:18.5” x 21.5”
Approx. 1,300 cfm @ .05 SP
Ship Wt: 8 lbs.

The JD1501 Two-Sided Ceiling Inlet, made specifically for hogs, is made of a frictionless styrofoam flap on a continuous PVC hinge that swings down to access the main room to distribute clean attic air. The JD1501 Hog Inlet is fully insulated to minimize condensation, dripping, or freezing; gravity or mechanical control.

Part #90841 (Counterweighted)
Part #90840 (Winched)
Framed Opening: 28.5” x 24.5”
Approx. 2,400 cfm @ .05 SP
Ship Wt: 13 lbs.

The JD2600 Two-Sided Ceiling Inlet, made specifically for hogs, is made of a frictionless styrofoam flap on a continuous PVC hinge that swings down to access the main room to distribute clean attic air. The JD2600 Hog Inlet is fully insulated to minimize condensation, dripping, or freezing; gravity or machine actuated.

Part #90843
Framed Opening: 45” x 24”
Approx. 4,000 cfm @ .05 SP
Ship Wt: 20 lbs.

The JD4000 Two-Sided Ceiling Inlet, made specifically for hogs, is made of a frictionless styrofoam flap on a continuous PVC hinge that swings down to access the main room to distribute clean attic air. The JD4000 Hog Inlet is fully insulated to minimize condensation, dripping, or freezing; machine actuated.

Part #90650
Framed Opening: 27” x 8”
Approx. 1,000 cfm @ .125 SP
Ship Wt: 8 lbs.

The C1000 Ceiling Air Inlet is a great hog inlet for winter supply used to direct air along walkways to prevent chilling of small animals and reduce heat loss through the ceiling. The C1000 utilizes two W400 wall air inlets and features vacuum formed housing. A 1.5" flange is used for mounting with insulation to reduce condensation.

Part #90499
Framed Opening: 22.25” x 5.5”
Approx. 490 cfm @ .125 SP
Ship Wt: 1.6 lbs.

The W400 swine inlet is a versatile, all-season inlet that offers air direction control through the use of its bottom deflector louver. The W400 can be mounted to control air flow through a wall by framing in an opening. The W400 swine inlet has a bottom deflector louver is sed to direct airflow and, if desired, to shut off the inlet.

8' Ceiling Ductwork
Part #90994B
Framed Opening: 12” wide x 8” high
Ship Wt: 22 lbs.

Ceiling Mount Polystyrene Ductwork with W400 Inlets are designed for new or existing facilities. The ceiling mount ductwork for your pigs allows two-directional air delivery from a center slot in the ceiling. The air suppply is from the attic or pre-heated hallway. Eight foot sections accommodate up to six W400 inlets - three per side to deliver high volumes of air. Easily adapts as a replacement for continous baffle.

Part #90997B
Framed Opening: 6” wide x 8” high
Ship Wt: 13 lbs.

The Corner Mount Polystyrene Ductwork with W400 Inlets are designed for new or existing facilities. The corner mount ductwork is excellent when used to pull air out of the attic. The eight foot sections accommodate up to three W400 inlets. The Corner Mount Polystyrene Ductwork easily adapts as a replacement for continous baffle. Endcaps are available.