









|
Poultry Ventilation Systems
Double L has led the way in changing ceiling poultry ventilation in chicken and turkey houses over the last three years. Double L inlets are structured to take warm air from the attic to heat the living area of the poultry house.
Poultry ventilation in your confinement facility is a science and not as simple as many tend to believe. The air that you and your chickens, turkeys, etc. breathe cannot be seen and is easily taken for granted. Clean air is one of the most important parts of your livestock program. The idea of using warm air from the attic to heat the living area was proven by university testing to save money on propane expenses and improve floor conditions. The poultry inlets offered by Double L help to keep your air clean, lower your heating costs, and improve litter quality.
Click to view an informational video on our poultry products |
________________________________________
________________________________________
________________________________________



Part #90838
Framed Opening: 28.5” x 24.5”
Approx. 2,400 cfm @ .15 SP
Inlet Ship Wt: 13 lbs
The JDP2600C Double-Sided Poultry Ceiling Inlet has a frictionless styrofoam flap on a continuous PVC hinge that swings down to access the main room to preheat attic air. Fully insulated to minimize condensation, dripping, or freezing, the JDP2600C Ceiling Inlet is gravity or mechanical control. |
________________________________________



Part #90547
Framed Opening: 44.5” x 13.5”
Actual Inlet Size: 44" x 13"
Approx. 2,953 cfm @ .1 SP
Inlet Ship Wt: 11.6 lbs.
The DirectAire 4413 Machine Actuated Sidewall Inlet has a curved louver blade that channels fresh air to the ceiling peak and speeds it to the center of even wider poultry houses. Great for reducing bird drafting and saving on heating costs, the DirectAire 4413 European Style Sidewall Inlet delivers significantly more CFM than conventional metal inlets and reduces the number of inlets needed overall. Insulated and fully sealed against air leakage, the DirectAire 4413 European Style Sidewall Inlet is rodent and corrosion resistant.
|
________________________________________
________________________________________


Part #90541
Framed Opening: 42” x 13.5”
Actual Inlet Size: 41.5" x 13"
Approx. 2,751 cfm @ .1 SP
Inlet Ship Wt: 10.5 lbs.
Made to fit wide houses with 6" x 6" posts! The DirectAire 4113 European Style Sidewall Inlet has a curved louver blade that channels fresh air to the ceiling peak and speeds it to the center of even wider poultry houses. Great for reducing or eliminating bird drafting and saving on heating costs, the DirectAire 4113 Sidewall Inlet delivers significantly more CFM than conventional metal inlets and reduces the number of inlets needed overall. Insulated and fully sealed against air leakage, the DirectAire 4113 European Style Sidewall Inlet is rodent and corrosion resistant.
|
________________________________________
________________________________________



Part #90548
Framed Opening: 22.5” x 14”
Ship Wt: 6 lbs.
The BA2213 DirectAire European Style Sidewall Inlet has a curved louver blade that channels fresh air to the ceiling peak and speeds it to the center of even wider poultry houses. Great for reducing or eliminating bird drafting and saving on heating costs, the DirectAire BA2213 European Style Sidewall Inlet is designed to draw fresh air from the attic during the winter and directly from outside during the summer - providing constant, even amounts of fresh air throughout the building all year round. |
________________________________________



TJP1255 Inlet Part #90740
TJP1265 Inlet Part #90741
Frame Opening for One Inlet: 22" x 6.5"
Frame Opening for Two Inlets: 46" x 6.5"
Ship Wt: 2.5 lbs per inlet
TJP poultry inlets feature patented counterbalance louvers that open from the TOP instead of the bottom. TJP Inlet Air is directed towards the peak of the chicken house, utiltizing the heat collected at the peak. The use of TJP1255 & TJP1265 Inlets eliminate curtain and baffle pulley and cable management required with traditional winter inlet systems. Use of wind deflector suggested. |
________________________________________

Part #90715
Model# WD48
48" flange to flange
The WD48 Wind Deflector mounts over the exterior vent openings to block direct wind and keep inlets operating at their optimum.
It is highly suggested that it be used with the TJP poultry inlets. Imported. |
________________________________________


TJP2655 Inlet Part #90735
TJP2665 Inlet Part #90738
Framed Opening: 48.5" x 9"
Model TJP2655 opens at .055 static pressure
Model TJP2665 opens at .065 static pressure
Ship Weight: 34 lbs.
Complete inlet with housing and light trap. Wall air inlet is designed with a weighted counterbalance louver that opens from the top instead of the bottom. Directs air along the ceiling and holds air up longer while mixing with room air. Minimal air restriction from the light trap. |
________________________________________


TJP1355 Inlet Part #90750
TJP1365 Inlet Part #90751
Framed Opening: 25" x 9"
Model TJP1355 opens at .055 static pressure
Model TJP1365 opens at .065 static pressure
Ship Wt: 19 lbs. per inlet
Complete poultry inlet with housing and light trap. This wall air inlet is designed with a weighted counterbalance louver that opens from the top instead of the bottom. This directs air along the ceiling and holds air up longer while mixing with room air. Minimal air restriction from the light trap. |
________________________________________
To learn more about a Double L product or where to purchase,
you may reach us toll free at 1-800-553-4102 or email us.
|